System Service / Repairs
The LTI team have over 20 years combined experience with Pyrotechnical Ignition Systems (PTIS) and have assisted clients worldwide with service, repair and spare parts for both LP PTIS and HP BIS.
The combined Cooperation With Nammo, Tronrud, FRAMO and LTI experience leads to a high Level of knowledge of both Legacy spare parts and New systems, which makes LifeTime Ignition Your number 1 partner for Pyrotechnical Ignition Systems - Service and Aftersale.
The LTI Team have standard offshore Certifications for Europe, UK and Canada (BOSIET, MIST... etc.) and can mobilize worldwide.
The combined Cooperation With Nammo, Tronrud, FRAMO and LTI experience leads to a high Level of knowledge of both Legacy spare parts and New systems, which makes LifeTime Ignition Your number 1 partner for Pyrotechnical Ignition Systems - Service and Aftersale.
The LTI Team have standard offshore Certifications for Europe, UK and Canada (BOSIET, MIST... etc.) and can mobilize worldwide.
|
| ||||
|
| ||||
Contact [email protected] or +47 414 25 448 to recieve assistance with your Pyrotechnical Ignition System.
Pellet Collector Services
The Pyrotechnical Ignition Systems "Pellet Collector" is a container localized on the Flare Deck, and has a sole purpose to catch and contain used LP2000 (or HP) Ignition Pellets.
Most Pellet Collectors are produced in a high quality alloy (Incolloy 800HT) and require little-none attention/Service.
The Pellet Collectors have an approximately capacity of 2000 used Ignition Pellets.
An Ignition System that operates past the Pellet Collector Capacity is not recommended and may lead to an unsafe status.
To perform Service on the Pellet Collector requires access to the Flare Deck to empty the Pellet Collector contens and to perform a visual inspection of the Pellet Collector State.
This has to be performed following a specific procedure to ensure safe handling and disposal of the used LP2000 pellets.
LTI have long experience with these tasks and can provide everything from assistance to complete handling of the Pellet Collector Service when requested.
Most Pellet Collectors are produced in a high quality alloy (Incolloy 800HT) and require little-none attention/Service.
The Pellet Collectors have an approximately capacity of 2000 used Ignition Pellets.
An Ignition System that operates past the Pellet Collector Capacity is not recommended and may lead to an unsafe status.
To perform Service on the Pellet Collector requires access to the Flare Deck to empty the Pellet Collector contens and to perform a visual inspection of the Pellet Collector State.
This has to be performed following a specific procedure to ensure safe handling and disposal of the used LP2000 pellets.
LTI have long experience with these tasks and can provide everything from assistance to complete handling of the Pellet Collector Service when requested.
Contact [email protected] or +47 414 25 448 to recieve assistance with your Pyrotechnical Ignition System.
Downloads:
|
MSDS LP 2000:
|
MSDS FS03:
|
LP2000 Refill Procedure:
|
PRODUCT INTRODUCTION:
| ||||||||
